How to install the inflatable castle

1, the installation of inflatable castles: 1, the inflatable castle placed on the flat ground, put a mattress, following the best (such as carpets, plastic color of the cloth), and then expand it. 2. Find the inflatable castle, air inlet, outlet and then connected with the fan and the fan port truss, and then alternate with rope truss inlet. 3. The blower power, the device will muster in 5-10 minutes. 

2, the installation of auxiliary fan: 1. Use GB 1.5mm2-4 mm2 cable is connected to several meters and the fan, connect the other end of the air switch, and connected to the electric shock protection 2. Use should be preceded by checking whether the supply voltage matches the nameplate direction of rotation is correct. 3. Should pick a reliable chassis ground, and regular inspections by the fan air inlet on the fence, to avoid accidents. 

3, the inflatable castle cleaning collection: 1. Cut off the power, open interfaces and exhaust fans, exhaust time is generally 10-25 minutes, and residual gas to be squeezed. If the device because of the rain water, be sure to drain the water and dry 2. To do cleaning, use detergent to the stain, wipe grease, and then cleaned with water, sun to dry. 3. The equipment collapsed, stopped by the underside of the front, and then tarpaulin to cover. 4. If long-term need to clean equipment, folding, bundling, packaging good. Storage temperature -50 ~ +40 degrees Celsius is generally appropriate. 5. Fans should pay attention to moisture, corrosion. Inflatable equipment should pay attention to rodent infestation bite.

Y&G Inflatable LogoFacebook Instagram YouTuBe

Авторские права @ Y&G надувной (Гуанчжоу Пангао Надувные Co., Ltd)   ICP провинции Гуандун № 12043169   Партнерские ссылки: www.yginflatable.net   www.pangoinflatable.com